i To turn the tire on the rim it may be necessary to
deflate the tire, unseat it again (using a tire fitter)
and re-inflate after turning.
4. Turn the tire on the rim so that the mark you have
made is situated where the valve is.
5. Fasten the wheel.
6. Turn the valve to 12 o'clock.
7. Press the <SPLIT> button.
The new position of the wheel on the flange
is saved.
OPT and 6 are displayed.
Step 7:
2. Checking measurement
1. Close the wheel guard.
Measurement begins.
See Step 5 for evaluation and further procedure.
Werther International S.p.A.
Minimizing unbalance | MERCURE 200 | 73
en
|
1 695 109 017
2019-01-07