11. User Settings - WERTHER INTERNATIONAL MERCURE 200 Manual De Instrucciones

en 74 | MERCURE 200 | User settings

11. User settings

i Settings which can be made by the user.
1. Keep the <MENU> key pressed for 3 seconds.
2. As soon as SET appears in the left-hand display, release the <MENU> key.
" TOL appears in the left-hand display and the current value in the right-hand display.
" To scroll press <MENU>
Function
Change of setting/value
Access to next setting, altered settings are stored
Exit from menu.
Attention: Altered setting is however stored
Setting
Tolerance for display value "0"
Display resolution
Balance weight
Unit for balance weight
Acoustic signal
Automatic start
Rim width display resolution
Positioning of adhesive weight
Automatic selection of the
balancing program
1) Function only available with gauge arm for measuring rim width fitted and activated.
|
1 695 109 017 2019-01-07
Left display Right display
TOL Current val-
ue in grams /
ounces
RES 1 or 5
UMB GRA
OUN
SND ON
OFF
CAR
ON
OFF
LAR 0.50
1)
0.25
ALU P G
P 3, P 6, P12
ATA ON
OFF
Key
<+> /<–>
<MENU>
<STOP>
Description
Entry of balance weight value below which the value "0" is to
be displayed.
Standard value 5 g (0,15 oz), maximum value 25 g (1 oz)
5 g / 0.25 oz - Standard resolution
1 g / 0.05 oz - Fine resolution
GRA = Display in grams
OUN =
Display in ounces
ON = An acoustic signal sounds on storing the data
determined
OFF = No acoustic signal sounds on storing the data
determined
ON =
Start of measurement by closing wheel guard
OFF = Start of measurement by pressing <START> key
(with wheel guard closed)
0.50 = Entry of rim width in 0.5 inch increments
0.25 = Entry of rim width in 0.25 inch increments
R Positioning of adhesive weight for ALU2, ALU3 and PAX2:
$ Setting PG:
Attachment with AluEasy®;
$ Setting P3, P6 or P12:
With manual vernier caliper or without tools:
Attachment in 12, 3 or 6 o'clock position.
R With all other programs and for all adhesive weights the bal-
ance weight must be attached in the 12 o'clock position.
ON = activates the automatic balancing program recognition
function.
OFF = does not activate the automatic balancing program rec-
ognition function.
Werther International S.p.A.