Brief Instructions - WERTHER INTERNATIONAL MERCURE 200 Manual De Instrucciones

en 60 | MERCURE 200 | Brief instructions
8.

Brief instructions

Description
User settings
R Tolerance for display value "0"
R Display resolution
Balance weight
R Unit for balance weight
R Acoustic signal
R Automatic start
R Rim width display resolution
(Option only available with gauge arm for measuring
rim width fitted and activated).
R Placing the adhesive weights
R Automatic balancing program selection
Basic settings (customer service only)
R Activation/deactivation of electron-
ic vernier caliper (and gauge arm for
measuring rim width if fitted)
R Locking of electronic vernier caliper
for attachment of adhesive weights
R Storage of balan cing position in ALU
and PAX programs by way of pedal
or time;
(Option not available for MERCURE 200)
R Activation/deactivation of gauge arm
for measuring rim width (machine ac-
cessory)
(Option not available for MERCURE 200)
R Activation or deactivation of quick
measurement cycle
R Switch-on and switch-off of
light and laser function;
(Option not available for MERCURE 200)
R Activation or deactivation of electro-
magnetic brake
(Option not available for MERCURE 200)
Alteration of values
Alteration of settings
+ = "On",
– = "Off".
Start: Start measurement
Stop: End measurement
Vernier caliper and gauge arm calibra-
tion
Flange calibration (without wheel)
Calibration MERCURE 200 (with wheel)
Keep the key pressed for at least 1 second
*
If SET appears, press the next key within 1.5 seconds
**
If CAL appears, press the next key within 1.5 seconds
***
As soon as SET appears in the left-hand display, release the
****
<MENU> key.
|
1 695 109 017 2019-01-07
Description
Change operator 1 - 2 - 1
Key Key Key
Change vehicle type
Car - Motorcycle
****
Change balancing program
R Standard clip-on weights
R Alu1: Standard adhesive weights
R Alu2: Concealed adhesive weights
R Alu3:
R Alu4:
R Alu5: Adhesive weights on inside /
R Static balancing on plane 1
R Static balancing on plane 2
**
R Static balancing on plane 3
R Pax1: Pax rim adhesive weights
R Pax2: Concealed adhesive weights
Rim diameter display
Selection of unit
Rim diameter Inch/mm.
Change rim diameter
Rim width display
Selection of unit
Rim width Inch/mm.
Change rim width
Display of distance between
rim and MERCURE 200
Change rim distance
***
***
Recording of calibration data
Display of number of spokes and
call-up of split program
***
Change number of spokes
***
***
End split program
Call-up/ End of matching program
(unbalance minimization).
With unbalance display only
R Display of exact unbalance value
measured.
R Exit from menu.
*
Clip-on weights on inside /
concealed adhesive weights on outside
Clip-on weights on inside /
adhesive weights on outside
clip-on weights on outside
Keep the key pressed for at least 1 second
Key Key Key
*
*
*
Werther International S.p.A.