54 9.9.1 Attachment Of Adhesive Weights Using - WERTHER INTERNATIONAL MERCURE 200 Manual De Instrucciones

en 70 | MERCURE 200 | Balancing a wheel
9.9.1 Attachment of adhesive weights using the
electronic vernier calliper (with AluEasy®)
1. Insert the adhesive weight of the value required for
balancing in the specific seat on the feeler;
2. Remove the feeler towards balancing position and
wait for the acoustic confirmation signal;
3. Rotate the calliper in order to move the feeler closer
to the rim and apply the weight.
Fig. 60: Internal adhesive weight application example
Fig. 61: External adhesive weight application example
9.9.2 Attachment of adhesive weights with vernier
caliper - Inner weight pliers
Fig. 62: Weights positioning gauge
1 Weights positioning gauge grip
2 Weights positioning gauge head
3 Inner weight pliers
4. Ejector
5 Outer weight pliers
6 Millimetric scale
7 Knurled screw
8 Slider with stop
|
1 695 109 017 2019-01-07
! For the standard programs use the weights position-
ing gauge internal clamp to position the adhesive
weight in the internal plane and in the external plane.
1. Insert the necessary adhesive weight in the internal
clamp for weights.
Fig. 63:
2. Position the weights positioning gauge head (2) on
the rim edge using the internal clamp (3) in contact
with the rim itself.
4
Fig. 64: Internal adhesive weight application example
C
Fig. 65: External adhesive weight application example
3. Using ejector (4) apply the adhesive weight and push
it to adhere well.
A
4
Werther International S.p.A.