Moving/Removing The Sensor - Myray Hyperion Instrucciones De Uso

5.6. MOVING/REMOVING THE SENSOR

On units equipped with two sensors, be particularly careful to fit each sensor on the correct holder. Take the
following image as a reference:
During operation, the sensor is mechanically locked and cannot be removed.
hyperion automatically sets up for removal or fitting when you select an examination different from the current one.
The sensor automatically goes down when necessary. The position can easily be detected by looking if the sensor is
free in the upper area (A).
Fig. 1
EN
Fig. 2
OPERATOR'S MANUAL
Fig. 3 Fig. 4
29