Snapper XD ESXDUC82 Manual De Utilización página 13

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 72
EN
AR BG CS DA DE ES ET FI FR HR HU IT LT LV NL NO PL PT RO RU SK SL SR SV TR UK
OPERATION
WARNING
You are responsible for controlling and
steering the utility cart once it is moving.
Grasp the handle securely before mov-
ing. Make sure you are ready to move
with the utility cart before pressing the
on-off button and lock-out button. Keep
a firm grip on the handle once you are
moving.
LOADING YOUR UTILITY CART
Load your utility cart carefully; disperse the
load evenly across the bucket. The bucket
can take up to 220 pounds (100 kilograms).
When moving up and down hills, limit your
load to no more than 220 pounds (100
kilograms). If you think you are carrying
too much, remove some material from your
utility cart.
INSTALL BATTERY PACK See figure 3.
„ Open the battery cover.
„ Align the raised rib inside the panel with
the groove on the battery pack.
„ Ensure the battery pack is secured in
place in the battery compartment.
„ Insert the battery key (14).
„ Close the battery cover.
REMOVE BATTERY PACK See figure 3.
„ Press the power switch to "OFF" position
to stop the product.
„ Open the battery door to access the
battery compartment.
„ Remove the battery key(14).
„ Depress the latch on the back of the
battery pack to release the battery.
„ Remove the battery pack.
English (original instructions)
When placing battery pack in the tool,
be sure raised rib on battery pack aligns
with the groove inside the tool and
latches into place properly. Improper in-
stallation of the battery pack can cause
damage to internal components.
LOCK/UNLOCK THE BRAKE
See figure 4.
„ Step on the brake (15), the brake will be
locked, and the utility cart will stop.
„ Step on the brake (15) again, the brake
will be unlocked.
STARTING See figure 5.
„ To utilize your utility cart set the power
switch(4) to the ON position.
MOVING FORWARD/REVERSE
See figure 6.
„ Select forward/reverse.
„ Select high/low speed.
„ Press lock-out button (2). (There is a
4-seconds lead time to engage step 4.)
If the thumb paddle (5) is not pressed
within 4 seconds, the unit will not
start and lock-out button needs to be
engaged again.
„ Press the thumb paddle (5) down to
start the utility cart.
NOTE! You can press the thumb paddle
(5) again to restart the utility cart within 30
seconds after releasing it. Move in reverse
only for short distances. If you have a
long distance to travel, turn your utility cart
around and go forward.
When moving in reverse. Be careful;
Step back and be prepared to walk
backwards. Consider standing to the
side of the utility cart until you get used
to moving backwards.
9
WARNING
WARNING

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

1696884

Tabla de contenido