Snapper XD ESXDUC82 Manual De Utilización página 8

EN
AR BG CS DA DE ES ET FI FR HR HU IT LT LV NL NO PL PT RO RU SK SL SR SV TR UK
WARNING
Do not operate the utility cart on the
road.
MOVING ON SLOPES
WARNING
Slopes are a major factor related to slip-
and-fall accidents, which can result in
severe injury. All slopes require caution.
If you feel uneasy on a slope, do not
drive on it.
„ Watch for holes, ruts, or bumps. Be
careful on uneven terrain to avoid
overturning your utility cart. Tall grass
can hide obstacles.
„ When moving down slopes, always keep
your utility cart in low gear and moving.
The friction of the motor helps you keep
better control of your utility cart.
„ Use caution when carrying heavy
loads up slopes. If your utility cart is
overloaded, the safety fuse may trip and
allow the utility cart to rollback toward
you, which may cause severe injury.
„ Do not turn on slopes unless necessary,
and then, turn slowly and gradually.
„ Do not move near drop-offs, ditches,
or embankments. The utility cart could
suddenly turnover if a wheel is over
the edge of a cliff or ditch or if an edge
caves in.
„ Do not park your utility cart on hills or
steep slopes.
CHILDREN
WARNING
This is not a toy. Children under 14 years
of age are not allowed to operate it.
„ Tragic accidents can occur if the
operator is not aware of the presence of
children. Keep children out of the work
English (original instructions)
area and under the watchful care of a
responsible adult. Stay alert, and turn
the utility cart off if a child enters the
work area. Look behind and down for
small children before and while driving
backwards. Use extreme care when
approaching blind corners, doorways,
shrubs, trees, or other objects that may
obscure your view of a child who may
run into the work area.
„ Do not allow children under the
age of 14 to operate this utility cart.
Children who are 14 years of age and
older must read and understand the
operating instructions and safety rules
in this manual, and must be trained and
supervised by a parent.
BATTERY TOOL USE AND CARE
„ For safety, battery only can be used at
-14~45℃ for discharge, and 6~40℃ for
charge.
„ The charging voltage must be less than
84V.
„ The charging current of BSB5AH82
(5 amp-hour) must be less than 30A.
The charging current of BSB4AH82 (4
amp-hour) must be less than 30A. The
charging current of BSB2AH82 (2 amp-
hour) must be less than 30A.
„ For battery tools:
• Instructions
charging,
ambient temperature range for tool
and battery use and storage, and the
recommended ambient temperature
range for the charging system during
charging;
• For a
intended for use with a detachable
battery pack or a separable battery
pack: instructions indicating the
appropriate battery packs for use,
such as by a catalog number, series
identification or the equivalent;
• Instructions
appropriate charger for use, such
as by a catalog number, series
4
regarding battery
information regarding
battery-operated
indicating
tool
the