8. SYSTE M INT E RFACE
Your Kenevo SL is equipped with a MasterMind TCU display.
The functionality of the system interface as summarized in this manual is
current as of the date this manual was written and is subject to change.
Specialized reserves the right to change the functionality at any time and
without notice, including modifying, reducing, and/or adding features.
WARNING! Use caution when viewing or using the display while riding, as it
can be distracting and can lead to accidents. You should always stop before
changing settings or operating the various functions of the display. Do not
attempt to customize the pages or perform setup adjustments while riding.
8 .1. M A ST E R MI N D TCU
8.1
DISPLAY
Fig. 8.1
15
USB C PLUG DOOR
POWER
ON/OFF
The MasterMind TCU turns on the system and provides information on the display.
The MasterMind TCU is controled by the buttons on the handlebar remote.
The MasterMind TCU has customizable screens that show options such as speed, battery
charge level, mode, heart rate, and more.
The type C USB port on the underside of the display is for Specialized retailers and service
centers.
8.2 . STA RTING TH E SYSTEM ON TH E MA STERMIND TCU
8.2
Fig. 8.2
To start the system, press and hold the POWER button located on the MasterMind TCU top
tube display unit, until the display turns on.
To power off the system, press the POWER button and the display turns off.
If the system does not power on after a long period on non-use, remove the
MasterMind TCU from the top tube and charge the MasterMind TCU via a
USB-C cable.