Specialized KENEVO SL Manual Del Usuario página 21

8 .1 0 . C ON N ECT I V IT Y O PT I O NS
The Turbo Technology System provides a high degree of interface flexibility through Bluetooth
and/or ANT+ connectivity.
BLUETOOTH LOW ENERGY (BLE)
BLE is used for connecting to the bike to the Mission Control app.
„
ANT+
ANT+ can be used to connect to the sensors for Speed, Rider Power, and Cadence. The
„
sensor data can be received via the ANT+ module built into the MasterMind TCU.
In your ANT+ device, search for those sensors and connect to them.
„
Some bicycle-specific ANT+ devices feature so-called "LEV" data fields you can use to see
„
all available e-bike data.
8 .1 1. ER R O R CO DES
8.9
19
Fig. 8.9
MasterMind TCU equipped bikes have a built-in diagnostic system to automatically check and
identify the functionality of the system. If the system detects an error, the MasterMind TCU will
show the error on the display. In some cases, the error message can be dismissed by pushing
any button on the remote.
Depending on the type of error message, the system may be switched off automatically. If you
receive an error message, please restart the system. If the error message continues to display,
please contact your Authorized Specialized Retailer for further instructions. In any case, the
bicycle can be ridden without motor support, with the system turned off.
Mission Control supports the rider with User Actions for errors and diagnostic
reports which can be shared with Retailers who can give further advice based
on the bicycle serial number.