Pre-Use Checks; During Use; Transport, Storage And Handling; Conditions For Transporting The Machine - Corghi ARTIGLIO 50 Manual De Uso

• Handling rim wheels.
• Inflating the tyre.
• Understanding the necessity to stand back from the tyre changer during tyre inflation and
during inspection of the rim wheel following inflation, never leaning over.
• Installing and removing rim wheels.
3. The employer shall evaluate each employee's ability to perform these tasks and to service
rim wheels safely, and shall provide additional training as necessary to assure that each em-
ployee maintains his or her proficiency.

1.6. PRE-USE CHECKS

Before beginning work, carefully check that all components of the machine, especially rub-
ber or plastic parts, are in place, in good condition and working properly. If the inspection
reveals any damage or excessive wear, no matter how slight, immediately replace or repair
the component.

1.7. DURING USE

In the event you hear any strange noise or feel unusual vibration, if a component or system is not
operating properly, or if there is anything unusual at all, stop using the machine immediately.
• Identify the cause and take any necessary remedial action.
• Contact your supervisor if necessary.
Never allow any bystander to be within 20 feet of the machine during operation.
To stop the machine in an emergency:
• disconnect the power supply plug;
• cut off the compressed air supply network by disconnecting the shut-off valve (snap coupling).

2. TRANSPORT, STORAGE AND HANDLING

Conditions for transporting the machine

For ARTIGLIO 55 see the manual 4-133267.
The tyre changer must be transported in its original packing and stowed in the position shown
on the packing itself.
- Packing dimensions:
• width ............................................................................................................................... 1320 mm
• depth ................................................................................................................................ 760 mm
• height .............................................................................................................................. 1830 mm
- Weight of wooden packing:
• STD version ........................................................................................................................ kg 320
• TI version ............................................................................................................................ kg 335
Artiglio 50/55 User Manual
NOTICE
UK
103