Demounting - Corghi ARTIGLIO 50 Manual De Uso

6.6. DEMOUNTING

Positioning the tool
- Move the tool head into
the working position
(1, Fig. 25a).
- It may be useful to press
the tyre down to make
room for the tool.
- Release the tool by pulling
block (2, Fig. 25b) towards
you.
- For correct tool positioning,
the insert (3, Fig. 25c) must
be against the edge of the
rim in the point where the
vertical wall starts.
- Press the block (2, Fig. 25c)
to fix the tool position.
Engaging the top bead
- Maintaining the pressure
of the bead breaker disc
on the tyre, create enough
space to allow the demount
tool to be rocked.
- Using control
26a) rock the demount tool.
- It is important to rotate the
turntable slightly
to facilitate engagement of
the bead.
Artiglio 50/55 User Manual
1
2
2
(1, Fig.
1
25a
25b
3
UK
25c
26a
127