Corghi ARTIGLIO 50 Manual De Uso página 129

- Now, and only now, oper-
ate the pedal
Fig. 27b) until the bead is
completely demounted.
During demounting, over-lubrication and/or an
unusually shaped rim edge may cause the tyre
to slip on the rim, making demounting difficult.
First, try using the bead breaker disc in an
upward direction to raise the tyre. Otherwise,
to speed up the procedure simply place the
PTS accessory between the tyre and the edge
of the rim. This will allow the bead to be lifted
quickly off the rim so that it can be demounted.
- Here again, it might be helpful to use the bead
breaker disc on the underside of the tyre.
Engaging the bottom bead
(Demounting using the tool head)
- Place the tool on the edge of the rim (Fig. 28a).
- Push the bead breaker disc
against the bottom bead
(B) using control
Fig. 28b).
-Using control
Artiglio 50/55 User Manual
(2,
NOTICE
(1,
1
(2, Fig.
2
27b
UK
28a
28b
129