43a
43b
6.11.b. INFLATING TYRES
1. Make sure the wheel on which the tyre is fitted is securely clamped on the turntable by
the centring handle (Fig. 43a).
2.
Make sure the tool head and the bead breaking unit are not near the work area, and if
possible are in the rest
position.
3. Remove the valve stem core if not already done (Fig. 43b).
4. Connect the air hose Doyfe inflator chuck to the valve stem (2, Fig. 43c).
2
4
5
3
43c
. Press
to inflate the tyre. The tyre will expand,
"HUMP" (H)
and the beads will seat.
If necessary:
6. Continue inflating up to the maximum value of 3.5
bar to position the tyre correctly on the rim. Avoid
distractions during this operation, and continually
check tyre pressure on the air pressure gauge (4, Fig.
43c) to prevent excessive inflation. Inflating tubeless
tyres requires a higher air flow-rate to allow the beads
"double HUMP" (H2)
to bypass the rim HUMPS - see types of rim profiles
43d
for mounting without a camera in Fig. 43d.
Artiglio 50/55 User Manual
142