Corghi ARTIGLIO 50 Manual De Uso página 131

-Obtain disc penetration by
keeping button
(2, Fig. 29b) pressed.
- Keep button
Fig. 29b) pressed, start to
rotate the wheel by pressing
pedal (3, Fig. 29c)
and at the same time raise
the disc a little at a time
using control
29b). Rotate until the tyre
is completely demounted.
Demounting the bottom bead (fig.30)
- For reverse rims the disc stroke range can be increased by turning the bead breaker
and tipping the disc over. (3-4, Fig. 30).
Demounting completed
- When demounting is completed release the penetration button
and lower the bead breaker disc using control
- Bring the bead breaker unit to the rest position by pressing button 3, Fig. 31b.
Artiglio 50/55 User Manual
(2,
1
(1, Fig.
2
3
(1, Fig. 31a).
29b
29c
(2, Fig. 31a)
UK
131