Corghi ARTIGLIO 50 Manual De Uso página 141

Verify that both upper and lower tyre beads and the rim bead seat have been properly
lubricated with an approved mounting paste.
Safety goggles with plain lenses and safety footwear must be worn.
Lock the rim on the turntable during inflation.
Remove the valve stem core if not already done.
Connect the inflation hose to the valve stem.
Step down partially on the pedal to inflate the tyre and seal beads with the inflation hose.
Frequently stop to check bead seating pressure on the gauge.
Avoid personal injury. Carefully read, understand and follow all instructions.
1. Overinflated tyres can explode, producing hazardous flying debris that may result in an
accident.
2. Tyres and Rims that are not the same diameter are "mismatched". Never attempt to mount
or inflate any tyre and rim that are mismatched. For example, never mount a 16" tyre on a
16.5" rim (or vice versa). This is very dangerous. A mismatched tyre and rim could explode,
resulting in an accident.
3. Never exceed the bead setting pressure (gauge on hose) pro-
vided by the tyre manufacturer, as stated on the sidewall of the tyre.
4. Never place your head or any part of your body over a tyre
during the inflation process or when attempting to seat beads.
This machine is not intended to be a restraining device for
exploding tyres, tubes or rims.
5. Always stand back from the tyre changer when inflating, never
lean over.
During this operation, noise levels assessed at 85 dB(A) may occur.
Wear hearing protection devices.
EXPLOSION HAZARD. An exploding tyre and rim may be propelled upward and
outward with enough force to cause serious injury or death.
Do not mount any tyre unless the tyre size (molded into the sidewall) matches the rim
size (stamped into the rim) exactly or if the rim or tyre are defective or damaged.
This tyre changer is not a safety device and will not restrain exploding tyres and rims.
Keep the area clear of bystanders.
Artiglio 50/55 User Manual
WARNING
WARNING
DANGER
UK
141