Publicidad
4. INSTALLING THE BELT COVER / INSTALLIEREN DER RIEMENABDECKUNG /
INSTALLATION DU COUVRE-COURROIE /
MODO DE INSTALAR LA CUBIERTA DE LA CORREA /
INSTALLAZIONE DEL COPRICINGHIA / 皮带外罩的安装
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the follow-
ing work after turning the power off and ascertaining that the motor is at rest.
WARNUNG :
Um durch plötzliches Anlaufen der Nähmaschine verursachte Verletzungen zu vermeiden, führen Sie die
folgende Arbeit erst aus, nachdem Sie den Netzschalter ausgeschaltet und sich vergewissert haben, daß
der Motor vollkommen stillsteht.
AVERTISSEMENT :
Pour ne pas risquer des blessures causées par une brusque mise en marche de la machine, toujours la
mettre hors tension et s'assurer que le moteur est au repos avant d'effectuer les opérations suivantes.
¡AVISO!
Para protegerse contra posibles lesiones personales debido a un arranque brusco de la máquina de co-
ser, cerciórese de comenzar el siguiente trabajo después de desconectar la corriente y de estar seguro
que el motor está completamente parado.
AVVERTIMENTO :
Per evitare possibili ferimenti causati dall'avvio improvviso della macchina per cucire, prima di effettuare
le seguenti operazioni spegnere l'interruttore dell'alimentazione ed assicurarsi che il motore abbia com-
pletamente cessato di ruotare.
警告 :
为了防止突然起动造成人身事故，请关掉电源，确认马达确实停止转动后再进行操作。
3
7
5
9
6
1) Attach belt cover stud 7 to the screw hole in the arm.
2) Fix belt cover (right) 1 on the arm with screws 2 and 8 .
3) Fit belt cover (left) 3 to notch A and B of the belt cover (right).
4) Fix belt cover (left) 3 with setscrews 4 , 5 , and 6 , and spacer 9 .
5) Fix belt cover, lower, (asm.) !0 on the machine bed with setscrews !1 and !2 .
1. After attaching the belt cover, confirm whether or not the respective cords do not come in contact
with the belt and the handwheel. Disconnection of the cords will result when they come in contact
with one another.
2. When the machine head is raised from the state of being tilted, be sure to insert belt cover lid C
into belt cover, lower (asm.) !0 .
4
8
A
1
B
2
!0
− 0 −
C
!2
!1
Publicidad
