Reverse Stitch Button; Dropping Thefeed D Ogs; Tosnap O Nand Snap O Ffthe Presser Foot; Todetach And Attach T He Foot Holder - Janome 385.4052LX200 Manual De Instrucciones

Reverse Stitch Button
While the reverse stitch button is pressed, the machine
sews backwards.
0 Reverse stitch button
Dropping the Feed Dogs
For dropping the feed dogs, push the lever to the right as
illustrated,
, After sewing, push the lever to the left side for up
position.
The feed dogs automatically return to the up position
when the machine starts running,
C) Drop feed lever
O Down position
(&) Up position
To Snap On and Snap Off the Presser Foot
<To snap off:>
Turn the handwheet toward you to raise the needle to its
highest position.
Raise the presser foot,
Press the lever on the back of the foot holder,
The presser foot wilt drop off,
• When pressing the lever, the lever should be
pushed in the direction of the arrow,
Do not press it from the top,
<To snap on:>
Place the presser foot so the pin on the foot lies just
under the groove of the foot holder
Lower the foot holder to lock the foot in place,
(_ Lever
(_ Pin
(_ Groove
• When changir_g the presser foot, turn off the
power switch,
To Detach and Attach the Foot Holder
<To detach:>
Raise the presser foot and loosen the setscrew by
turning it counterclockwise,.
<To attach:>
Align the hole in the foot holder with the threaded hole in
the presser foot bar and fit the setscrew into the hole_
T_ghten the setscrew by turning it clockwise,.
O Setscrew
Q Footholder
(_) Hole
Q Threaded hole
d
W
®
®
J
C
10