Stretch Stitch Patterns; Correcting Distorted Stitch P Atterns - Janome 385.4052LX200 Manual De Instrucciones

Stretch Stitch Patterns
Machine setting
O Stitch pattern:
(_) Presser foot:
(_) Thread tension dial:
Q Stitch width:
®
Patterns group A
Patterns group B
A: Zigzag stitch foot
2-6
3-5
Stitch length: • "$I" for stitch patterns group A,
-1-. "S2" for stitch patternsgroup B
The fabric moves back and forth for the stretch stitch
sewing, guide the fabric gently along with the edge of the
foot..
If patterns are uneven when sewing with a particular
fabric, refer to the "Correcting Distorted Stitch
Patterns"
® ® ®
n il n
_z_ _:_ ....... $1 S2
J
J
Correcting Distorted Stitch Patterns
The sewing results of the stretch stitch patterns may vary
depending upon the sewing conditions, such as sewing
speed, type of the fabric, number of layers etc,
Always make test sewing on a scrap piece of the fabric
that you wish to use,
if decorative stitch patterns are distorted, correct it with
the feed balancing dial.
In normal sewing, set the feed balancing dial to
the neutral position, i,8 the groove on the dial is
centered with the standard setting mark,,
* If the pattern is compressed, turn the dial in the
direction of "+",
If the pattern is drawn out, turn the dial in the
direction of "-".
(_ Feed balancing dial
(_ Standard setting mark
(_ Groove on the dial
Q Correct shape
(A) _ (B)
54