Automatic Needle Threader; Drawing Upthe Bobbin Thread - Janome 385.4052LX200 Manual De Instrucciones

Tabla de contenido

Publicidad

Automatic Needle Threader
[]
Raise the needle to its highest position and
push down the needle threader knob until it
stops.. The hook comes out through the needle
eye from behind it.
Needle threader knob
(_) Hook
[]
[]
Pull the thread down around the thread guide,
then pass the thread from the right and under
the hook as shown.
(_) Thread guide
[]
Hold the end of the thread gently,
and release
the needle threader
knob gently so the loop of
thread is pulled up,
[]
Remove the loop of thread from the threader
and pull out the end of thread from the needle
eye
,._ Recommended
needles
and threads
for the
needle threader:
Threads:
#50 to 100
Needles:
#1t to I6 and Blue Tipped
needle
Drawing Up the Bobbin Thread
[]
Raise the presser foot and hold the needle
thread with your left hand_
(_ Needle thread
[]
Turn the handwheet one rotation toward you to
raise the needle to its highest position.
Draw up the needle thread to pick up a loop of
the bobbin thread.
(_) Bobbin thread
[]
Slide 10 cm (47 of both threads to the back
under the presser foot,
@m
J
[]
[]
26

Publicidad

Tabla de contenido
loading

Tabla de contenido