[To Sew] - Janome 385.4052LX200 Manual De Instrucciones

[TO sev_
[_ Fold back the left seam allowance, Turn the
right seam allowance under to form a 0,2 to
03 cm (1/8') fold., Place the zipper teeth next to
the fold and pin it in piaceo
(_ Bottom side fabric
(_) End of the opening
(_) Zipper teeth
0 0,3 cm fold
_) Topside fabric (Wrong side of fabric)
(_ Opening
0 Fold
_) Basting stitch
[] Attach the zipper foot with the pin on the right
hand side,. Lower the foot onto the topside at
the bottom of the zipper so that the needle
pierces the fabric next to the fold and the zipper
tape.
Sew along the zipper guiding the zipper teeth
along the bottom edge of the foot
[] Sew through all layers next to the fold. Stop
5 cm (2) before zipper foot reaches the slider on
the zipper tape. Lower the needle slightly into
the fabric. Raise the foot and open the zipper.
Lower the foot and stitch the remainder of the
seam
@999_ Slider
@ 5 cm (2')
[] Close the zipper and spread the fabric open fiat
with the right side of the fabric facing up.
Baste the opened fabric and zipper tape
together
O Basting
_8 Zipper tape
[] Remove the zipper foot and attach it with the
pin on the left side.
Backstitch across the end of opening to
07-1 cm (3/8").
Stitch through the garment and zipper tape,
guiding the zipper teeth along the bottom edge
on the foot Stop about 5 cm (2")from the top of
the zipper and lower the needle into the fabric
by turning the handwheel toward you, then raise
the foot and remove the basting stitches (refer
to the preparation step 2)_
Remove the basting stitches
_) Reverse stitch (0.7-t cm)
[] Open the zipper (moves the slider to the back)
and lower the foot and stitch the remainder of
the seam making sure the fold is even. Remove
the basting stitches,
[]
®
®
@
[]
[]
[]
[]
44