Pattern Selector Dial; Stitch Width Dial; Stitch Length Dial; Variable Needle Position - Janome 385.4052LX200 Manual De Instrucciones

Pattern Selector Dial
Select the pattern by turning the pattern selector dial and
the selected pattern is shown in the pattern indicating
window
Raise the needle above the fabrics and raise the presser
foot when you turn the pattern selector dial,
O Pattern selector dial
(_ Pattern indicating window
Stitch Width Dial
Turn the stitch width dial to set the desired stitch width
at the setting mark,.
The higher the number, the wider the stitch width
(_ Setting mark
2 3
I
4 5 6 7 8 9 10
A
"'(9
?
_5 4 3 2 I
0_
J
Stitch Length Dial
Turn the stitch length dial to set the desired stitch length
at the setting mark.
The higher the number, the longer the stitch length
You can select the suitable stitch length for fabrics that
you plan to sew..
(_ Setting mark
_, This "ECC]" mark indicates the adjustable
allowance for buttonhole stitch density.
_, Stitch length of" $I "is for the stretch stitch
patterns group A.
._ Stitch length of" $2 " is for the stretch stitch
patterns group B
Variable Needle Position
When the straight stitch is selected, you can move the
needle between center and left needle positions.
'r st s2 "_' i
I I
I
'.',• ,'",, i 1
432
J
0
t
_5 4 3
,, i '_ ,,_
[
2 0_
J
28