Installing The Pc Software; Installation Of The Easyware Pc Software - Medizintechnik EasyOne-CS 2001 Manual Del Usuario

2030434-002 Rev. B
After the above-specified settings have been entered for the first time, all settings apart from the re-
gion, can be changed at any time using the DEVICE CONFIGURATION menu item in the main menu. Al-
ternatively, you can change the settings using the PC software.

4.4 Installing the PC software

The minimum requirements for installing the PC software are as follows:
Operating system:
Processor:
Screen resolution:
Hard disk memory:
RAM:
Internet Explorer:
(Please refer to the corresponding manual for detailed information for CardioSoft

4.4.1 Installation of the EasyWare PC software

You will require Administrator privileges to install the software. Proceed as follows:
•
Do not yet connect the Screen-Connector to the PC.
•
You will require Administrator privileges on the PC in order to install the software.
•
Quit all programs and insert the EasyWare CD into your CD ROM drive. The installation routine
should start automatically within 30 seconds of inserting the CD. If the installation routine does
not start automatically, switch to directory 'Setup' on the CD-ROM and run the Setup.exe pro-
gram. You will then see the following window:
•
Click on "Next >".
•
Enter the user name under "User Name" and enter a name for your organization under "Organi-
zation". In the bottom part of the window, you can still select whether this application is to be
installed for all users ("Anyone who uses this computer") or for you only ("Only for me"). Now
click on "Next >".
Microsoft Windows 2000 (min. SP4), XP Home and Professional (min. SP2)
Pentium ≥1.6 GHz
SVGA 1024 x 768
4 GB (depending on number of procedures), 300 MB free
256 MB
Microsoft Internet Explorer 6.0 or higher
Page 7
TM
)