Test Result Preview - Medizintechnik EasyOne-CS 2001 Manual Del Usuario

2030434-002 Rev. B
Note that records cannot be deleted within the synchronization range (see above). These records are
reloaded from the instrument during the next synchronization operation.
Records that have been created in conjunction with CardioSoft

7.6 Test result preview

Test data can be assessed by selecting a record and double-clicking on it. Alternatively, you can also
use Test Results in the View menu or the corresponding icon in the toolbar. The following window is
opened:
The Test Result Preview window has the following content:
•
Measurement curves (depending on type of measurement), Pre and/or Post test with predicted
points.
•
Patient and test information.
•
Test results, Pre and/or Post Test
•
Test quality and system interpretation.
You can skip to the next or previous record using the arrow keys. You can also do this on the keyboard
using the PgUp or PgDn keys.
More information can be shown using the 'Advanced' selection button. Advanced parameters are dis-
played and you have the option of adding comments and editing as follows:
•
Entry of a reviewer name is necessary for making changes.
•
A comment can be assigned to the test.
•
The order of the tests and the acceptance can be changed by clicking on a test (for example,
click on 'Trial1'). This is possible only if the test was conducted with setting '3 best curves' (see
Chapter 8.2 'Test Settings').
Tests performed using CardioSoft
Chapter 5.2.3).
The EasyWare Test Result Preview can be copied easily to other applications (Microsoft Word for in-
stance). Perform the following steps to do this:
1. Launch the program to which the data is to be copied (Microsoft Word for instance).
2. Launch EasyWare.
3. Choose the test to be copied and double-click on the test or choose Test Results in EasyWare's
View menu.
4. Choose what data is to be displayed (Baseline, Post or both)
TM can be changed only if the test is displayed via CardioSoft
TM
cannot be deleted.
Page 24
TM (see