10. Technical Data; 10.1 Ambient Conditions; 11. Disposal - Braun Aesculap GN200 Instrucciones De Manejo

Note
Other accessories, applied parts and replacement parts are described in
Aesculap brochure C-304-81 and C-902-02

10. Technical data

Classification acc. to Directive 93/42/EEC
Art. no. Designation
GN200 High frequency surgical device
Mains voltage ranges
(Current intake)
Frequency
Protection class (acc. to
IEC / DIN EN 60601-1)
Foot switch circuit
Output power
Device protection
Time-Current characteris-
tic
Breaking capacity
Construction
HF operating frequency
Operating mode
Weight
Dimensions (L x W x H)
Application part type acc.
to IEC/DIN 60601-1
Recovery time of the defi-
brillation-protected out-
put
CISPR11
EMC
Conforming to standard
100V~–240 V~ (6.7 A–2.8 A)
50–60 Hz
I
ignition-safe acc. to IEC/DIN EN 60601,
approved for use in "medical environment"
2 x 150 W on 50 Ohm
T8 AH/250 V
T (Time lag)
H (1 500 A)
5 mm x 20 mm
460 kHz ± 1 %, Quasi-Sinus
Int 10 s/30 s
8.1 kg
400 mm x 355 mm x 100 mm
CF
0 seconds
Class A
IEC/DIN EN 60601-1-2
IEC/DIN EN 60601-1
IEC/DIN EN 60601-2-2

10.1 Ambient conditions

Temperature
Relative
Class
humidity
IIb
Atmospheric
pressure
Note
The atmospheric pressure of 700 hPa corresponds to a maximum operating
altitude of 3 000 m.
Note
After transporting or storing at temperature outside the operating temper-
ature range, leave the HF generator for one hour before use so that it can
reach room temperature.

11. Disposal

Note
The user institution is obliged to process the product before its disposal, see
Validated reprocessing procedure.
►
Detailed information concerning the disposal of the product is avail-
able through your national B. Braun/Aesculap agency, see Technical
Service.
Operation
non-condensing
Adhere to national regulations when disposing of or recy-
cling the product, its components and its packaging!
The recycling pass can be downloaded from the Extranet
as a PDF document under the respective article number.
(The recycling pass includes disassembling instructions for
the product, as well as information for proper disposal of
components harmful to the environment.)
Products carrying this symbol are subject to separate col-
lection of electrical and electronic devices. Within the
European Union, disposal is taken care of by the manufac-
turer as a free-of-charge service.
en
Storage and transport
50
-10 -10
90
10
non-condensing
17