Description; Description And Identification Of Generating Set - SDMO RES 9.5EC Manual De Instalación, Uso Y Mantenimiento

2. Description

2.1. Description and identification of generating set

The position of the various generating set components is given in the figure below. The generating set can be identified by means
of a rating plate.
1. Silencer
2. Dipstick
3. Oil filler cap
4. Air filter
5. Fuses
6. RS-232 connector
7. Control unit (ADC 2100 controller)
8. Generating set main switch (RUN/OFF/RESET/AUTO)
9. Line circuit breaker (single-phase models)
10. Field connection terminal block location
(single-phase models)
11. Position of spark plugs (both sides)
12. Oil drainage hose
13. Oil drainage tap
Figure 2.1: Position of generating set components, RES 9.5 EC / RES 13 EC / RES 12 TEC
14. Oil filter
15. Exhaust outlet
16. Equipment ground
17. Relay card
18. Battery charger
19. DSAI wires
20. Multifuel unit
21. Pressure regulator
22. Supply solenoid valve
23. Fuel inlet
24. Air intake
25. Position of engine starter battery
4/73