Coviden Kangaroo ePump Manual De Instrucciones página 45

communications equipment and the Kangaroo™ ePump™ Enteral Feed and Flush Pump with pole clamp
The Kangaroo™ ePump™ enteral feed and flush pump with pole clamp is intended for use in an electromagnetic environment in which radiated RF disturbances
are controlled. The customer or the user of the Kangaroo™ ePump™ enteral feed and flush pump with pole clamp can help prevent electromagnetic interference
by maintaining the minimum distance between portable and mobile RF communications equipment (transmitters) and the Kangaroo™ ePump™ enteral feed and
flush pump with pole clamp recommended below, according to the maximum output power of the communication equipment
Rated maximum output
power of transmitter
W
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated using the
equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer.
Note 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
Note 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people.
Kangaroo™ ePump™ Enteral Feed and Flush Pump with Pole Clamp
Recommended separation distances between portable and mobile RF
Separation distance according to frequency of transmitter
150 kHz to 80 MHz 80 MHz to 800 Mhz
d = 1,2√P
0,12
0,38
1,2
3,8
12
m
d = 1,2√P
0,12
0,38
1,2
3,8
12
41
800 MHz to 2,5 GHz
d = 2,3√P
0,23
0,73
2,3
7,3
23
Table of Contents