Vol Sol
0.1 ~ 999.9mL, Increment : 0.1mL
8.2 Technical characteristics
Classification
I classify, Internal power supply , CF type of application part , Continuously delivery , The device
cannot be used in mixture with air of flammable anesthetic gas and oxygen or nitrous oxide and
mixture of flammable gas.
8.2.1 Operation mode
The pump is designed for continuously delivery of intravenous infusion.
8.2.2 Battery specifications
The wall plug must be connected directly to the mains power socket.
Power supply
Fuse
AC Power
Maximum power estimat
ion
Power cord length
External
DC
power
supply
12V ~ 15V / Power>15W
( user option )
8.2.3 Battery specifications
Characteristics
Weight
Battery life
Battery recharge
8.2.4 Power consumption
Power consumption of the pump in standard operating conditions: < 10W.
8.2.5 Dimensions – Weight
Pump
Packaging
8.2.6 Compliance with standards
Li-ion polymer battery : 11.1Vdc, 2000mAh
Approximately 120g
The battery life is approximately 8 hours when fully charged running at a
rate of 5ml/h or at any rates lower.
Pump OFF: < 10 h, Pump ON: <14 h
Weight
Dimensions (W×D×H)
3kg
240mm×150mm×117mm,excluding pole clamp protrusion
3.5kg
296mm×248mm×155mm
220V, 50Hz with a ground fault protection
F2AL/250V , 2pc
35VA
2.5M
111