Basic Operations; Power On And Off - Diemer P1800 RIDICON Manual

→ →
When the AC power source is connected, either the fully charged battery symbol is displayed or the
symbol representing the battery being charged is displayed.
4.2.3 Battery Charging System
The battery charging system is a part of the internal circuit device. No matter power on or off, as
long as connect ac power, the battery will be charging automatically. And any fault in the battery
charging system must be repaired by the manufacturer's authorized technical personnel.

4.3 Basic operations

4.3.1 Power On and Off

Power On
3. 1.
 Press and hold
 All indicators momentarily light.
 The device performs a self-test.
 The alarm indicator flashes twice in sequence, first in yellow, and next in red.
 An audio tone sounds.
If self-test is successful, the device will be paused waiting for user input in an infusion mode.
Information:
 When the device is paused, the symbol
user to take an action such as adjusting infusion parameters or starting
infusion. If no action is taken in 3 minutes,"No Action"alarm is activated.
If the self-test fails, an error message will be displayed. Contact the manufacturer sales
representative immediately.
2 Power Off
 Press and hold
The symbol contains two (2)
rectangles, yellow and red.
The symbol contains one (1) red
rectangle and is blinking.
The rectangles successive repeated
display
key till the display turns bright. 
Except power indicator
（
key till the display turns black. 
Battery is low, and "Battery
Low" alarm is activated.
Battery is empty, and "Battery
Empty" alarm is activated.
Battery is charging
） 
is displayed, signaling the

81