Diemer P1800 RIDICON Manual página 92

and the parameter was set and effective.
Select
and the parameter is no changed.
4.4.1.4 Near empty
Press or

the parameter is selected, it will be highlight displayed,
Use
 or
 Press key to return to user setup interface.
Information:


 When select
Information:
Select
and the parameter was set and effective.
Select
and the parameter is no changed.
4.4.1.5 Syringe calibration
 Press or
Information:
 There are three types syringe brand of user defined:"User-defined_1"
 Automatic identification syringe size of 5ml
Push the plunger of the syringe till the tip reaches 0 scale (0 ml)

 Pull the plunger till the tip reaches syringe's full nominal scale (e.g., for a 50ml syringe, till the 
and press
key to select the parameter to set （ "Near empty volume",
to set parameter.
Default near empty volume
Near empty volume range is 0.1
or ， press
and press
and press
key to select syringe brand.
"User-defined _2"
，
, the display changes into user setup interface
turn green,

： 1.0ml 。
5ml increment by 0.1ml.
～ ，
, user interface will be changed.
, the display changes into user setup interface
, the display changes into user setup interface
"User-defined _3".
,
turn red.
10ml 20ml 30ml
、 、 、 、
, and press key.
） , when
，
50ml.
94