Diemer P1800 RIDICON Manual página 83

Press key to start infusion.
4.3.5 Sequential Mode
Information:
In Sequential Mode:
The parameters, flow rate and VTBI, are set by the user.
-
 Press key till the display shows "MODE: Sequential".
Press return to rate mode interface.

 Press or
"VTBI2","Rate3", "VTBI3", ） , when the parameter is selected, it will be highlight displayed,
 Use or
Information:
"VTBI"range ： 0.1ml ～ 9999.9 ml 。
 When select
Information:
Select
interface and the parameter was set and effective.
Select
Press key to start infusion.

key to select the parameter to set （ "Rate1", "VTBI1", "Rate2",
to set the parameter value as required.
or ， press
and press
and press
, user interface will be changed.
, the display changes into Sequential mode
, the display changes into rate mode interface.
85