Device Reset - Diemer P1800 RIDICON Manual

 Press /
selected, it will be highlight displayed.
 After select "Check",
Information:
 The history records including: start date&time, ending date&time, flow rate, infused

4.4.1.11 Brightness
Information:
 Setting the brightness to adapt to the clinical use of the environment.
Press key to enhance the display brightness.

key to weaken the display brightness.
 Press
4.4.1.12 Software version check
To check the software version and hardware version of the pump. 


4.5 Device reset

 Insert the end of a needle or a straightened paper clip or
a toothpick into the reset hole near the AC power inlet.
 Push it as far as it goes till the display turns black.
Information:
 The device needs to be reset when the control of the device cannot be restored by
any other means, for example, the device cannot be switched off.
Warning:
 Contact the manufacturer if the reset does not work and the device
malfunctioning persists.
key to select the parameter to set （ "Check", "Export" ） , when the parameter is
press key to enter into history record interface.
volume, and stop position.
Use or

key to check page by page.




97