Homelite HCS3335 Manual De Utilización página 32

GB
F D E
Weight - No bar, chain, fuel or Lubricant
Fuel tank capacity
Lubricant tank capacity
Bar lengths
Bar type
Chain pitch
Chain gauge
Chain type
Drive sprocket
Engine displacement
Maximum engine power (ISO7293)
Maximum engine speed with attachment
Idling engine speed
Specific fuel consumption at
maximum engine power
Sound pressure level (ISO22868)
Sound power level (ISO22868)
Vibration (ISO22867):
- Front Handle
- Rear Handle
FEATURES
1. Front hand guard/
Chain Brake
2. Front handle
3. Cylinder cover
4. Primer bulb
5. Choke Lever
6. Chain
7. Starter Grip
8. Guide Bar
9. Chain Catcher
10. Trigger Release
OPERATION
Read the operation manual and follow all
warnings and safety instructions.
Wear eye protection and ear protection.
Keep all bystanders, especially children and pets,
at least 15m from the operating area.
For your safety, study this entire manual before operating
I P NL S DK
33 cc
HCS3335
HCS3335C
HCS3340
4.8 kg
575 cm
350 cm
35-40 cm
Carlton MHC/
Oregon Double Guard
9.53 mm (0.375 inch)
1.27 mm (0.05 inch)
Carlton 3/8" LP/Oregon 91 Carlton semi-chisel/Oregon 33 Carlton semi-chisel/Oregon 33
6-tooth
33 cm
1.3 kW
9,500 min
2,800 - 3,400 min
477 g/kwh
95 dB(A)
105 dB(A)
9.4 m/s
12.2 m/s
11. Chain Lubricant Cap
12. Silencer
13. Carburettor
Adjustment
14. Rear handle
15. Throttle Trigger
16. Fuel Mix Cap
17. On/Off Switch
18. Starter/Fan Housing
19. Spiked bumper
N FIN GR HU CZ RU
English
SPECIFICATIONS
40 cc
HCS4040
HCS4040C
4.8 kg
3 575 cm
3 350 cm
40 cm
Carlton HC/
Oregon Double Guard
8.26 mm (0.325 inch)
1.27 mm (0.05 inch)
7-tooth
3 40 cm
1.5 kW
-1 12,500 min
-1
2,800 - 3,400 min
490 g/kwh
97 dB(A)
107 dB(A)
2 8.4 m/s
2
10.9 m/s
the saw. Pay particular attention to the precautions and
instructions listed in the operatorʼs manual.
UNDERSTANDING YOUR CHAINSAW SAFETY
DEVICES
LOW KICK-BACK SAW CHAIN
A low-kick-back saw chain is a chain which has met the
kickback performance requirements.
The rakers (depth gauges) ahead of each cutter can
minimise the force of a kick-back reaction by preventing
the cutters from digging in too deeply at the kick-back zone.
Only use replacement chain that is equivalent to the original
chain or has been certified as a low kick-back chain.
As saw chains are sharpened, they lose some of the low
kickback qualities and extra caution is required.
GUIDE BARS
Generally, guide bars with small radius tips have
somewhat lower kick-back potentials.
24
RO PL SLO HR TR EST LT
3
3
3
-1
-1
2
2
WARNING
The warnings and instructions in this section of
the operatorʼs manual are for your safety and to
prevent serious personal injury.
LV SK BG
45 cc
HCS4545
HCS4545C
4.8 kg
575 cm 3
350 cm 3
45 cm
Carlton HC/
Oregon Double Guard
8.26 mm (0.325 inch)
1.27 mm (0.05 inch)
7-tooth
45 cm 3
1.6 kW
12,500 min -1
-1
2,800 - 3,400 min
490 g/kwh
97 dB(A)
107 dB(A)
8.4 m/s 2
2
10.9 m/s