WARNING Any external security devices used for compliance with the limits
of impact forces must be conform to standard EN12978.
WARNING In compliance with EU Directive 2012/19/EG on waste electrical and
electronic equipment (WEEE), this electrical product should not be treated as
municipal mixed waste. Please dispose of the product and bring it to the collection
for an appropriate local municipal recycling.
E
VERYTHING THAT IS NOT EXPRESSLY PROVIDED FOR IN THE INSTALLATION MANUAL IS NOT ALLOWED
C
ORRECT OPERATOR OPERATION IS ONLY ENSURED WHEN THE REPORTED DATA IS RESPECTED
COMPANY DOES NOT TAKE RESPONSIBILITY FOR DAMAGE CAUSED BY FAILURE TO COMPLY WITH THE
INSTRUCTIONS CONTAINED IN THIS MANUAL
,
C
PRODUCT
THE
OMPANY RESERVES THE RIGHT TO MAKE ANY CHANGES DEEMED APPROPRIATE AND AT
ANY TIME IN ORDER TO TECHNICALLY
WITHOUT BEING REQUIRED TO UPDATE THIS DOCUMENT
2 PRODUCT DESCRIPTION
NET724 EVO is a control unit for DEA System automations with a single 24V motor.
The main feature of this control unit is the simplicity of the input and output confi guration, which makes it adaptable to any
type of automation as required. All that is required is to set the desired confi guration for the automation being used to have
the operating parameters optimally set, excluding all other unnecessary functions.
3 THECNICAL DATA
Supply voltage (V)
Transformer rated power (VA)
Fuse F1 (A)
Auxiliary devices power supply output
Output 1 confi gurable
Output 2 confi gurable
Radio receiver frequency
Type of remote control encoding
No. of remote controls managed
. W
ITHOUT AFFECTING THE ESSENTIAL FEATURES OF THE
,
STRUCTURALLY AND COMMERCIALLY IMPROVE THE PRODUCT
.
80 VA (230/25V)
T1A 250V (ritardato)
HCS fi x-code - HCS rolling code - Dip-switch - DART
NET724 EVO
230 - 240 V ~ (50/60 Hz)
150 VA (230/25V)
T2A 250V (slow blow)
24 V
max 200mA
24 V
max 5 W
24 V
max 5 W
433,92 MHz
200
NET724 EVO
.
. T
HE
29