Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
USE AND MAINTENANCE
CAUTION
Never engage the pto when the machine is closed as this would certainly break the transmission unit.
This is because the couplings of the side cardan shafts block the transmission unit when bent at a 90° angle.
The machine will now be closed and in safety conditions, and can therefore be taken to the fi eld.
ATTENTION
When lifting,folding and unfolfi ng the implement, pay attention to keep a safe distance from power cables
(fi g.27).
How to open out the machine
-
Proceed in the following way once you have reached the place of work:
- Make sure that there are no persons or animals near the tractor-machine assembly.
- Get off the tractor and turn the locking clips until they have completely detached from the pins (1 fi g.25).
- Get back on the tractor and operate the lever of the valve system that opens out the units: pressure is delivered to pipe 4 (fi g.22).
- First the clips must disconnect and then the transmission units must lower.
- The movement made by the units as they close and open may not be synchronized, but this will not affect the functionality in any way.
- Once the units have lowered, the operator must lower the machine until the knives barely touch the ground.
- Once these operations have terminated, engage the power take-off and begin to work by gradually digging the machine into the soil.
It is advisable to become fully familiar with these operations before using the implement.
fi g.27
64 - EN
cod. F07011381
Publicidad
