Panasonic EYADA Serie Manual De Instrucciones página 14

HOW TO USE
(cont.)
Checking Fastening Status
This unit notifies you of the work status
with a buzzer and the detection lamp.
■ Fastening OK
When the clutch activates and the screw
is normally fastened, the buzzer emits a
short beep and the detection lamp lights
up in green to tell you that the screw has
been normally fastened.
You can also use the rotation time in
combination as determination criteria.
• The detection conditions can be changed
via a web browser. P. 33 to 36
• The lighting colour of the lamp can be
changed via a web browser. P. 45
Detection lamp
Solid green
A short
beep
OK
26
EN
■ Count-up (Count finished)
The number of fastened screws
determined as OK has reached the set
count quantity.
With a buzzer (a long beep) and the blue
detection lamp, you are notified that the
set number of screws has been fastened
successfully.
• Set the count quantity.
P. 40
• The lighting colour of the lamp can be
changed via a web browser. P. 45
• The buzzer pattern can be changed via a
web browser. P. 44
• The buzzer (volume) can be changed via
a web browser.
P. 44
Detection
lamp
Solid blue
A long
beep
OK OK OK
■ Fastening NG (NOK)
The tool stopped without clutch activated
or detection conditions satisfied.
The buzzer emits a buzz and the
detection lamp lights up in red to tell you
that the screw has not been properly
fastened.
• Pressing the OK button will clear the error
display.
• The lighting pattern of the lamp can be
changed via a web browser. P. 45
Detection lamp
Solid red
Buzz
NG
Finishing Work
Set the forward/reverse lever
to the trigger switch lock
position.
Set it to the " ○ " position.
○ position
Turn OFF the power switch
of the power adapter,
or
disconnect the power plug
from the outlet.
Turn OFF the power switch.
Power switch
Disconnect the power plug from
the outlet.
Power plug
Example: For Europe
27
EN