Panasonic EYADA Serie Manual De Instrucciones página 26

SETTING ON THE TOOL
1. Switching to Setting Mode
This unit can change settings according to the work.
To change settings, switch to setting mode.
Operation mode
Detection
lamp off
■ Switching to Setting Mode
Set the forward/reverse lever
to the trigger switch lock
position.
Set it to the " ○ " position.
Hold down the OK button.
A buzzer sounds short twice (two
short beeps), and the detection
lamp blinks yellow.
Blinking
yellow
Two short
beeps
50
EN
Setting mode
Yellow detection
lamp blinking
■ Back to Operation Mode
Hold down the OK button
while you are in setting
mode (the detection lamp is
blinking yellow).
A buzzer sounds short three times
(three short beeps), and the
detection lamp turns off.
Three short
beeps
Release the forward/reverse
lever from the trigger switch
lock position.
When you set it to the F position
and the R position, the motor
rotates forward (clockwise) and
reverses (anticlockwise)
respectively.
2. Selecting Menu
You can select a menu by pressing the ▼ and ▲ buttons while you are in setting
mode.
A menu to be selected appears on the display.
Press the OK button to confirm the selected menu.
OK button
■ Count Menu (c + Number)
Display
Quantity Reset Permission
Setting
■ Basic Setting Menu (b + Number)
Display
Tool Reset Permission Setting
Running Mode Switching Setting
Display
▲ button
▼ button
Description Reference page
53
Description Reference page
54
55
51
EN