Panasonic EYADA Serie Manual De Instrucciones página 20

SETTING VIA A WEB BROWSER
Soft snug
[Functional overview]
You can set the start time of soft snug
and the number of rotations during soft
snug.
• The duration of soft start must not be
shorter than the start time of soft snug.
• Because of the structure of the motor, it
requires some time to decrease the
normal speed to the speed of soft snug.
What is soft snug?
In order to prevent bit detachment and minimize the impact on the base material,
the bit is rotated slowly before snugging.
[Default value]
• Start timing
0.00 s
• Rotation level
10 Lv
[Setting value]
• Start timing
0.00* s to 9.99 s
• Rotation level
1 Lv to 10 Lv
Soft snug speed level (Rotations/minute)
Level 1
EYADA218WA ・ WB
EYADA212WA ・ WB
EYADA407WA ・ WB
* Relative to the maximum
About 25%
number of rotations
Level 6
EYADA218WA ・ WB
1200
EYADA212WA ・ WB
EYADA407WA ・ WB
* Relative to the maximum
number of rotations
• The values (numbers of rotations) are only guidelines.
Entering the value with (*) will disable the function.
38
EN
(cont.)
Soft start Soft snug
time
Working
Work start
(Rotating)
2 3 4
450 600 750 900
300 400 500 600
160 220 270 330
About 50%
7 8 9
1350 1500 1650
800 900 1000 1100
430 490 540 600
About 75%
Disable fastening time
[Functional overview]
You can set the tool not to start
during the set time after fastening
time
is determined as OK.
• When both the "Ignore count time"
and the "Disable fastening time"
are enabled, the "Disable fastening
time" takes precedence.
Fastening OK
[Default value]
0.00 s
[Setting value]
0.00* s to 9.99 s
Entering the value with (*) will disable the function.
5
1050
700
380
10
1800
1200
650
About 100%
Fastening OK
The bit
does not
rotate.
Fastening is
executed during
the set time.
After fastening is determined as OK, the Electric
Screwdriver does not start during the time set in
the Disable fastening time.
39
EN