Panasonic EYADA Serie Manual De Instrucciones página 24

SETTING VIA A WEB BROWSER
Displaying the History Screen
Displaying the Top Screen.
Refer to "Displaying the Setting Screen" to "Connecting via Network" in
"PREPARATION BEFORE USE" of the Operating Instructions of the controller
(EYARW1) and make settings via a web browser to display the top page.
Displaying the History Screen.
In the top page (the initial page of the setting screen), click [History] on the top
and select the "Fastening history" tab.
You can view the fastening history data sent from tools to the controller.
To display the data, select the desired controller and tools from the tool list on the
left and click [Get data] on the upper right.
The fastening history logs are displayed from newest to oldest.
Tool list
46
EN
(cont.)
History Log Item List
Count
[Display overview]
The accumulated number of times of fastening after pairing is established.
This is reset when the tool is unpaired.
Batch size (Count quantity)
[Display overview]
When the controller's running mode is "Free mode":
When the controller's running mode is "Repeat mode": Target quantity of the batch
Batch count
[Display overview]
When the controller's running mode is "Free mode":
When the controller's running mode is "Repeat mode": Count (fastened quantity) of
Date/Time
[Display overview]
This shows the date when work was done.
OK/NOK judgment
[Display overview]
The work result is shown as "OK" or "NOK".
The OK/NOK criteria are as below:
OK:
NOK:
Reverse rotation results in blank.
NOK message
[Display overview]
When the work result is "NOK", the cause is shown as "Torque", "Rotation count",
"Rotation time", "Clutch", or "Error".
If "NOK" is considered to be caused by "Error", error details are shown in "Error
message" of the fastening history.
(For details on "NOK message", refer to
Clutch was activated and fastening is successfully completed.
The tool stopped without clutch activated or detection conditions satisfied.
P. 65
Hidden
Hidden
the batch
.）
47
EN