Panasonic EYADA Serie Manual De Instrucciones página 2

FEATURES OF PRODUCT
This unit is a compact and easy-to-grip
Electric Screwdriver equipped with a
brushless motor.
It handles well and is very easy to maintain
because there is no need to replace a
brush, thereby providing a comfortable
working experience.
* Connecting tools to the controller allows
collective setting of functions.
( Be sure to connect them to the controller
before starting collective setting)
■ To prevent leaving screws unfastened
Set the number of screws to fasten.
■ To check the fastening status
Set the detection lamp.
■ To perform fastening quality judgement
Set the upper and lower limits of parameters.
■ To select lever start or push start
P. 21
Set the start mode.
■ To prevent tool mix-ups
Set the order of using tools.
* Refer to "SETTING THE FASTENING CONTROL MODE" in the Operating
Instructions of the controller (EYARW1).
■ To check or save the fastening data
Check the fastening history data via a web browser on a PC.
Use the separately sold Controller Management Software to automate collection of the
fastening history data and conduct simple data analysis.
■ To check or save the fastening torque values
Save the converted torque. You need to set an offset. (Model No. WA only)
2
EN
P. 40
P. 26
P. 33 to 36
Lever start Push start
P. 33
■ Support functions helpful for screw fastening
Rotation start
1st screw
Lower Limit
Setting
Ignore judgement
Soft start Soft snug
time
P. 41 P. 37 P. 38
Task
Ignore unexpected momentary
rotations when performing
judgement.
Slow the rotation rate at the start
(to prevent galling, etc.).
Slow the rotation rate before
snugging
(to minimise an impact, etc.).
Prevent counting refastenings
(during a specific period).
Prevent refastenings
(during a specific period).
Set how to count reverse rotations.
Set how reverse rotations should
be treated after the last screw is
fastened.
Count-up
Fastening OK
(Count complete)
2nd screw Nst screw
Upper Limit Count Quantity
Setting Setting
P. 33 to 36 P. 40
Batch complete
Ignore count time
judgement waiting time
No combined
P. 42 P. 43
use
Disable fastening
time
P. 39
Count return
P. 42
Reference
Support function
page
Ignore judgement time
Soft start
Soft snug
Ignore count time
Disable fastening time
Count return
Batch complete judgement
waiting time
41
37
38
42
39
42
43
3
EN