Panasonic EYADA Serie Manual De Instrucciones página 28

SETTING ON THE TOOL
b4 Tool Reset Permission Setting
A tool reset is permitted.
When you set it to "_1", you can initialise
the tool by holding down the OK button,
▼ button, and ▲ button at the same
time in setting mode.
P. 52
■ Setting Procedure
Switch to setting mode.
Set the forward/reverse lever to the
trigger switch lock position, and
hold down the OK button.
P. 50
Choose "b4" by pressing
the ▲ and ▼ buttons, and
press the OK button.
A set value appears on the display.
Select a desired one by
pressing the ▲ and ▼
buttons.
The default is "_1".
Display Tool reset permission
Not permitted
(Tool reset disabled)
Permitted
( The tool reset is
permitted. To execute
the tool reset, hold
down the OK button, ▼
button, and ▲ button at
the same time.)
54
EN
(cont.)
When it is set to "_1"
The set value
goes back to
the default.
A tool reset is
executed.
Press the OK button to
confirm it.
When the setting is completed, a
buzzer sounds long (a long beep),
and the display returns to the menu
screen.
Back to Operation Mode.
Hold down the OK button.
P. 50
b9 Running Mode Switching Setting
You can switch the running mode of the
tool.
P. 14
■ Setting Procedure
Switch to setting mode.
Set the forward/reverse lever to the
trigger switch lock position, and
hold down the OK button.
P. 50
Choose "b9" by pressing
the ▲ and ▼ buttons, and
press the OK button.
A set value appears on the display.
Select a desired one by
pressing the ▲ and ▼
buttons.
The default is " ＿ ＿ ".
Running Mode
Display
Switching Setting
Stand Alone Mode
( The tool is not
connected to the
controller in this mode.)
Wireless
Communication Mode
( The tool is connected
to the controller in this
mode.)
Press the OK button to
confirm it.
When the setting is completed, a
buzzer sounds long (a long beep),
and the display returns to the menu
screen.
Back to Operation Mode.
Hold down the OK button.
P. 50
55
EN