Panasonic EYADA Serie Manual De Instrucciones página 27

SETTING ON THE TOOL
Tool Reset (Initialisation Setting)
Put the tool settings back to the
manufacturer default settings.
To enable this function, set " b4 Tool
Reset Permission Setting" to "_1".
P. 54
■ Setting Procedure
Switch to setting mode.
Set the forward/reverse lever to the
trigger switch lock position, and
hold down the OK button.
(For details, see )
P. 50
Hold down the OK button,
▼ button, and ▲ button at
the same time.
A buzzer sounds long (a long
beep), and "--" appears on the
display.
The detection lamp turns off.
Display
▲ button
▼ button
OK button
A long
beep
52
EN
(cont.)
c4 Quantity Reset Permission Setting
A manual reset of the count quantity is
permitted.
When it is set to "_1", you can reset the
count by holding down the ▼ and ▲
buttons at the same time, without having
to wait for the end of the quantity
specified in the count quantity setting.
■ Setting Procedure
Switch to setting mode.
Set the forward/reverse lever to the
trigger switch lock position, and
hold down the OK button.
P. 50
Choose "c4" by pressing the
▲ and ▼ buttons, and press
the OK button.
A set value appears on the display.
Select a desired one by
pressing the ▲ and ▼
buttons.
The default is "_1".
Quantity reset
Display
permission
Not permitted
(Manual reset disabled)
Permitted
( The manual reset is
permitted.
To execute the manual
reset, hold down the ▼
and ▲ buttons at the
same time.)
When it is set to "_1"
3
1
The count
goes back to
the default.
A manual reset
is executed.
Press the OK button to
confirm it.
When the setting is completed, a
buzzer sounds long (a long beep),
and the display returns to the menu
screen.
Back to Operation Mode.
Hold down the OK button.
P. 50
53
EN