Publicidad
Idiomas disponibles
Idiomas disponibles
EN
OWNER'S MANUAL
LABELLING
Rechargeable Li-on Battery 10INR21/71-4
Max. Charge Current: 10 A
Max. Charge Voltage:
BMZ Batherien-Montage-Zentrum GmbH
Min. Discharge Voltage: 28 V
Zeche Gustav 1 · D-63791 Karlstein
Artikel: 606326 / GEB20-W32 / 12345678901 / S/N: 123456 Made in Germany
USE THE BATTERY ONLY FOR THE PROVIDED PEDELEC. PROTECT BATTERY FROM OVERHEATING. DROPPED OR DAMAGED BATTERIES.
MAY NOT CHARGED OR USED. CHARGE ONLY UNDER SUPERVISION AND DO NOT USE A CHARGING DEVICE OTHER THAN THE ONE MADE
FOR USE WITH YOUR DEVICE. DO NOT DISASSEMBLE OR MODIFY THE BATTERY. DO NOT CONNECT (+) AND (-) POLES BY USING
METALLIC OBJECTS. PROTECT THE BATTERY FROM WATER.
CAUTION: Ignoring the instructions may result in fire or explosion of the battery! Risk of fire and burns. Do not open, crush, heat above 80 ˚C (176 ˚F)
or incinerate. Follow manufacturer´s instructions. Charge: 0 to 45 ˚C. Discharge: -20 to +55 ˚C.
If the label is damaged or missing, the warranty is void.
Explanation of symbols
Symbol
Meaning
General warning symbol
Do not throw in the fire
Do not immerse in liquids
Do not charge defective batteries
Follow the instructions
Lithium-ion battery symbol (contains recyclable material)
Complies with the relevant European directives
Do not dispose of with ordinary waste
18
Nominal Voltage:
36 V
42 V
Nominal Enargy: 725 Wh
Rated Capacity: 20.0 Ah
INSTALLATION OF BATTERY
1. Lock the lock
3. Click the battery in the lock
5. Check that the battery is firmly secured in place
NOTICE
Do not leave the key in the lock after locking. It may be lost or damaged.
Do not turn the cranks while the key is in the lock. The key may collide with the crank, damaging the
components.
EBIKE
2. Insert the battery socket into the connector on
the bracket
4. Remove the key
Publicidad
