Kellys E-Bike Instrucciones De Uso página 27

EBIKE
NOTICE
The riding range is only an approximate distance and may not correspond to the actual distance you
can still ride.
CHANGING THE ASSIST MODE DISPLAY
Displays the current assist mode. To switch between the assist modes, press the Y (Assist mode Y)
or X (Assist mode X) button on the assist mode selector or the UP or DOWN assist mode, respectively.
Shimano levels
HIGH (BOOST)
NORMAL (TRAIL)
ECO
OFF
WALK
WALK ASSIST MODE
1. Press the assist mode down button (hereafter referred to as "DOWN") to switch the assist mode to
"OFF".
2. Press the DOWN button again for 2 seconds until "WALK" is displayed.
3. Press and hold DOWN to start the walk assist mode.
When "WALK" is displayed on the assist mode switch, press, and hold the DOWN button to start the
assist mode function for walk. Release the DOWN button to stop the walk assist function; you can also
stop the walk assist function by pressing to increase the assist mode.
If you do not use the DOWN button for more than 1 minute, the mode will change to OFF.
If the e-bike does not move when the walk assist function is switched on, the function will stop
automatically. To reset the walk assist function, release the walk assist switch and press and hold the
DOWN button again. The walk assist function can operate for a maximum speed of 6 km/h. The assist
level and speed vary depending on the gear position.
PANASONIC GX ULTIMATE SYSTEM
If you are using the PANASONIC E-bike system on your e-bike, please check and follow this information:
Screen/controller functions:
6
2
11
3
1
10
4
8
1. Assist level select button (/)
To select the assist mode level [HIGH] -high, [STD] -medium, [ECO] -low, [OFF] -assist system off,
[AUTO] -automatic mode
2. Night mode button
Turns on the side screen backlight. It is also used to switch on the front and rear lights.
EN
OWNER'S MANUAL
9
12
5
14 13
7
25