Kellys E-Bike Instrucciones De Uso página 28

EN
OWNER'S MANUAL
3. Info button
Switches between displayed values (e.g. distance travelled)
4. Button with e-bike symbol (push assist)
Switches on the e-bike push assist mode. To help push a e-bike with a heavy load up to
a maximum speed of 6km/h.
5. Battery level display
Graphical image of the remaining battery charge.
6. USB connection status indication
Appears when an external device (such as a phone) is connected
7. Assistance level indicator
In the form of a graph, it shows the level of force that the system is assisting the rider with.
8. Text indicator
Indicates the level of assistance
9. Night mode indicator
Lights up when night mode is on
10. Current speed indicator
11. View riding data
12. Button to switch on the system
13. USB plug
Can be used to charge an external device (phone, e-bike light with rechargeable battery)
14. Rubber cap for USB socket protection
SWITCHING ON THE E-BIKE SYSTEM
To switch on the system, press the power button on the side display. The system is in OFF mode at
start-up.
WARNING
Do not put your feet on the pedals before pressing the button. If you step on the pedals when
engaging, you may experience a torque sensor error or weak assist force.
Do not press any other button when switching on the system, this may cause an error message. If this
happens, press the power button again.
26
NOTICE
Do not switch the system on/off while riding. If you do not need assistance, select the OFF/NO ASSIST/
level using the assist selection buttons.
The electrical system assist function will not work in the following cases:
- when you stop pedalling
- after reaching a speed of 25 km/h (when the speed drops below this level, the assist is switched on
again)
- when the battery reaches the "discharged" state
- when you switch to OFF/NO ASSIST mode
SWITCHING OFF THE E-BIKE SYSTEM
To turn off the system, press the power button or after approximately ten minutes of inactivity, the
system will turn off automatically to save power.
BATTERY LEVEL DISPLAY
You can monitor the remaining energy in the battery in two ways:
Fully charged. Remaining energy 91 % – 100 %.
Decreasing energy.
Charge at 11 % – 20 %. Notification to recharge the battery.
Charge at 0 % – 10 %
Fully discharged battery. You can continue riding without electrical assistance
but charge the battery as soon as possible to avoid damaging it.
- constant graphical display in the upper right corner of the screen (the charge drop display will
appear after 10 %)
- the "information" button switches to the remaining charge display, here the charge is displayed
EBIKE