avoid the external moisture from entering the inner
cavity of the fuel tank.
Shift pedal
This type of motorcycle adopts
the usual meshing six interna-
tional gear (non-cycle) shift
mode, the operation is shown in
the figure. The neutral is
located between the low speed
gear and the second speed
gear, stepping down from the
foot tip of the neutral and hanging into the low speed
gear; each time the tip of the foot picks up the shift
pole, it moves into the next high grade; each step on
the tip of the foot moves into the next low gear.
Because of the use of ratchet mechanism, it is not
possible to improve or reduce multiple grades at
one time.
Caution
When the transmission is in a neutral position, the
overhead indicator light will be lit and the clutch rod
should still be released slowly to determine whether
the transmission is indeed in a neutral position.
Rear brake pedal
Step on the rear brake pedal
and the rear wheel acts as a
brake. When the rear brake is
manipulated, the rake lamp
will be lit.
Side stand
The stand is on the left side of the vehicle. Please
kick the stand in place with your feet when you stop.
The side stand has the function of automatic flame-
out: when the side stand is standing in the vehicle
(the side stand is turned on), the engine can not
start or turn off automatically, only by putting the
stand away, the engine can start normally.
Notice
Do not hold the vehicle on a sloping slope, or the
vehicle may overturn. Please check the position of
the stand before parking the vehicle.
Tool kit
The vehicle tool is placed under the cushion. Using
on-board tools, you can carry out some on-the-road
repairs, small adjustments and parts replacement,
14