Publicidad
Idiomas disponibles
Idiomas disponibles
Oil level and oil exchange of engine
Check the engine oil level
before starting the engine.
When checking the oil level,
let the car stand upright on a
f l a t g r o u n d a n d o b s e r v e
t h r o u g h t h e o i l w i n d o w
whether the liquid level is
between the scale (L) and the
(F) range. When the oil level is lower than the lower
calibration line (L) position, the upper refueling port
cover 1 should be opened and the oil should be
added to the top calibration line (F) position.
Replacement of oil and oil filters:
Notice
When changing the oil, when the temperature of
the engine is not cooled, the body should be sup-
ported by the support frame (to ensure that the
motorcycle is in the horizontal plane and keep the
body vertical) to ensure that the oil is discharged
quickly and completely.
The engine oil capacity is about 1.5L, 1.1L (no oil fil-
ter is replaced) or 1.3L (oil filter is replaced at the
same time).
F
1. When releasing oil, put the drain basin below the
oil position, remove the oil discharge bolt 1,
thoroughly put the oil in the box, reinstall the oil
discharge bolt, and replace the oil filter 2
According to the following steps:
• Use the caliber 30mm sleeve or wrench lamp
to remove the special tool to jam the front part
of the oil filter (figure 3 position), rotate coun-
terclockwise and remove the oil filter that
needs to be replaced.
• Wipe the oil filter and the installation surface
of the engine with a clean cloth.
24
Publicidad
