Publicidad
Idiomas disponibles
Idiomas disponibles
Warning
Do not adjust the drive belt on your own, incorrect
operation may make the belt kink or flip, easy to
lead to belt fracture.
Brake
The vehicle is equipped with a two-channel ABS
disc braking system before and after configuration.
Correct braking operation is very important for safe
riding. Remember to check the braking system reg-
ularly, and this inspection should be carried out by
the qualified maintenance service center.
Adjustment of brake
1. The free stroke of the end
of the front brake handle
should be 10-20mm.
2. Measure the distance of
the brake pedal when the
brake begins to brake.
The free itinerary should
be: 20-30mm.
Friction plate
The main point of checking the friction plate is to
see if the friction plate in the front brake clamp 1
and the rear brake clamp 2 is worn to the bottom
line mark of the slot 3. If you grind this mark, you
should replace the new friction plate.
Brake fluid
The liquid level is reduced
because the liquid stored in
the cylinder is automatically
injected into the brake hose
after the friction disc is worn
20-30mm
out. The front fluid reservoir
is installed above the right
29
Publicidad
