Tires; Maintenance Of Air Filter - QJMOTOR SRV 300 Manual Del Usuario

Tires

Correct wheel tire pressure will provide maximum
stability, driving comfort, and tire durability. Check
the tire pressure and adjust it as necessary
Front tire wheel tire pressure
Rear tire wheel tire pressure
Notice
Check the tire pressure before cycling in the "cold"
state of the tire.
The depth of the pattern on the crown pattern of the
tire should be greater than or equal to 0.8mm, and if
the wear is less than 0.8mm, the new tire should be
replaced.
Warning
Do not try to repair the damaged tires. Wheel bal-
ance and tire reliability may deteriorate. Improper
tire inflation will lead to abnormal tread wear and
threaten safety. Insufficient tire inflation may cause
tire skidding, or tire detaching, or even damage to
the wheel ring, which may lead to control failure
and lead to danger.
It is a dangerous thing to drive a motorcycle under
the condition of excessive tire wear, which is not
conducive to ground adhesion and driving.
220 ±10 kpa

Maintenance of air filter

250 ±10 kpa
The air filter is located below
the fuel tank on the right side
of the motorcycle. If the air fil-
ter is blocked by dust, the
intake resistance increases
a n d t h e o u t p u t p o w e r
decreases, while the fuel con-
sumption increases. In order to
achieve the best filter effect,
please often check the cleanli-
ness of the filter core.
The filter core of the air filter
forbids cleaning (including
the inability to blow dust with compressed air). Any
cleaning may cause the filter core function to
degrade and damage the engine. For each driving
7000km of the vehicle, the filter core should be
replaced, and the replacement of the empty filter
31
Warning