Safety Precautions for Motorcycles
Safe riding rules
1. The vehicle must be inspected before driving in
order to avoid accidents and damage to the
parts.
2. The driver must pass the examination of the traf-
fic management department and obtain a driving
license consistent with the permitted vehicle
before driving. Vehicles are not allowed to be
lent to people without a driver's license.
3. In order to avoid the harm of other motor vehi-
cles, the driver should pay as much attention as
possible. To this end, please:
– Wearing a bright and conspicuous tight dress
– It is not appropriate to be too close to other
motor vehicles.
4. Strictly abide by the traffic rules and are not
allowed to rush for traffic.
5. Most of the accidents occur because of speed-
ing, so the speed must not exceed the maximum
speed limit of the road section.
6. Turn on the steering light in advance when turn-
ing or diverting to attract the attention of others.
7. At intersections, car park entrances and exits
and fast lanes, special attention should be paid
to driving carefully.
8. Random motorcycle modification or disassembly
of the original parts, which will not ensure the
safety of driving, at the same time is illegal, and
will affect the vehicle warranty.
9. The configuration accessories must not affect
the driving safety and operating performance of
motorcycles, especially the overload of electrical
systems is easy to cause danger.
Protective apparel
1. In order to ensure personal safety, drivers must
wear safety helmets, protective glasses, as well
as riding boots, gloves and protective clothing.
Attendants are also required to wear safety hel-
mets and hold on to the armrest of the occu-
pants.
2. During riding, the exhaust system becomes hot,
and it is still hot for a while after stopping the
engine. Do not touch the exhaust system during
blanching.
3. Do not wear lenient clothes that may be tripped
by control rods, pedals, or wheels while driving.
4