Publicidad
Idiomas disponibles
Idiomas disponibles
Content
Check points
Drive chain (chain
• Tight fit
drive model applica-
• Proper lubrication
ble)
• Tight fit, no cracks
Drive belt (belt drive
• No impurities such as
model applicable)
Height inspection of cool-
Coolant
ant storage
Riding Motorcycle
Engine Starting
Rotate the ignition switch key to "
make sure that the transmission is in an empty posi-
tion and that the indicator light over the instrument is
lit.
Press the right handle to start the switch. "
the throttle is closed, press the piezoelectric starting
switch to start the engine.
gravel
" in position, and
" when
Caution
The clutch lever should be clenched when the
transmission is in neutral position and the engine
should be started.
Warning
Do not turn on the engine in a room where there is
no good ventilation or no ventilation. In the
absence of attention, you are not allowed to leave
the starting motorcycle for a moment.
Caution
When you don't drive, don't let the engine run too
much, or it will overheat and may damage the
internal components of the engine.
Starting
Put away the stand, hold the clutch grip, stop for a
few seconds, step down the gearshift lever and
hang it up. Rotate the throttle control handle in its
19
Publicidad
